Inter-row blade mod. Rapid Lam on rear-mounted tool carrier frame mod. Compass with joystick control and fast blade return.

Our mechanical hydraulic weeder



RapidLam” with tunnel-shaped frame

The blade operating between the vines is the ecological alternative to chemical weeding; in fact thanks to these blades the weeds are destroyed and decay in a natural way making the maintenance of the soil around the vine stocks easy.

Rapid Lam mounted on a tool carrier frame with hydraulic control unit and heat exchanger.

Rapid Lam mounted on a tool carrier frame with joystick control for fast blade return.

Characteristics

The Lama Group’s palpator has been updated with innovative techniques; thanks to the help of a new one
valve, the sensitivity of the override has been improved, the speed of return, and it also allows you to operate
easily on difficult and particularly firm terrain.
Thanks to its particular structure, the “Rapid Lam” climbing group can be applied quickly, either on special frames of our production, to be positioned independently on the rear, front or ventral lift, both in the lateral and bilateral (right/left) version.
In addition to the blade of two sizes (L = 350 / 500 mm), it is possible to mount a special ploughshare.
Depending on the length, two or three clod-breaking fins can be mounted on the blades to separate the grass roots from the soil.
The working depth (6/7 cm max) is determined by means of a mechanically or hydraulically adjustable wheel (on request).
Furthermore, on the final part of the blade it is possible to insert a small tipping ploughshare.

Inter-row Rapid Lam blade mounted on the front of the tractor via tool holder frame mod. Compass. Field tests.

Mechanical Hydraulic Weeder Turbo-Bas ECO 2020

Tool for the mechanical-hydraulic weed removal, designed to remove the weeds around the plants, in orchards and vineyards.

This assembly was designed to be fitted to suitable frames, on both the front of the tractor, in single, bilateral or tunnel version, and in lateral position in single or double versions, with specific flanges or to the universal rear hoist of any tractor, with special support frames, for the use on the left or right side.

In the photograph: Lawnmower unit applied to the tool-holder frame mod. Compass equipped with hydraulic control unit with heat exchanger.

Further Informations

Besides it was designed (to be easily fitted) to substitute the blade (mod. Rapid-Lam) working between the rows, this tool is used for the mechanical weed removal, under the grass substrata (maximum 7 to 8 cm depth) between the rows, during the summer with dry soils, not to have a rapid start of the grow of the weeds.

We designed this tool with the aim of proposing an medium/low investment, since the user will have at disposal two tools on a single frame, so being able to manage tall stages of the production cycle of the plants, the weeds under the vines, without being obliged to use chemical product proved to be extremely polluting for the environment.

The mod. Turbo-Bas Eco2020 mechanically operated mechanical whip weeder will be used mainly at the beginning of the season (from February to June), later on you will use the blade (Rapid-Lam).

The interchangeability of the tools and the different types of work enable managing the soil under the plants easily and successful for the whole season until the harvest.

In the end, the mod. Turbo Bas Eco 2020 mechanical weeder with whips, without the tunnel system with hydraulic feeler, can be substituted with a simple spring movement, certainly more economical, yet slower during the straddling operation

Moreover, the extreme compactness and the lightweight of the equipment with a height a slow as only 30 cm ensure the possibility of working on the most diverse soils and in rows with various training methods (Guyot, low spurred cordon, etc.) and on slopes with both vertical and horizontal rows.

With simple anchoring brackets, it can be applied even on small, light and narrow hydrostatic cultivators or on tine harrows, flail mowers, etc.

The whips are made of a special, soft and wear-resistant polyamide copolymer (nylon). 


Thanks to its particular structure, the “Rapid Lam” climbing group can be applied quickly, either on special frames of our production, to be positioned independently on the rear, front or ventral lift, both in the lateral and bilateral (right/left) version.

The working depth (6/7 cm max) is determined by means of a mechanically or hydraulically adjustable wheel (on request).
Furthermore, on the final part of the blade it is possible to insert a small tipping ploughshare.

The frame is equipped with two hydraulic positioning movements:
*lateral displacement approx. 0.60 m
*hydraulic inclination ± 30%
*wheel for adjusting the working depth, hydraulic on request
*hydraulic mechanical distributor with three-function mechanical joystick with flow divider
*electro-hydraulic distributor
*electro-hydraulic control (emergency button for quick blade/share return)

Straddler mod. Rapid Lam with Kult star accessory

The equipment consists of a special blade which is constantly kept in the working position (approximately at 90°) by a hydro-mechanical system.

It allows us to destroy weeds, lift the root part of the grass from the ground and quickly re-enter it, thanks to the sensitivity of the special palpator, every time it comes into contact with the vine stump brace or the support pole. Once the obstacle has been overcome, the Interceppi Blade quickly resumes its working position.

The Lama Group palpator has been updated with innovative techniques; thanks to the aid of a new valve, the sensitivity of overriding and the speed of return have been improved, and it also allows you to operate easily on difficult and particularly firm terrain.

In addition to the blade of two sizes (L = 350 / 500 mm), it is possible to mount a special ploughshare. Depending on the length, two or three clod-breaking fins can be mounted on the blades to separate the grass roots from the soil.

Further Informations

For any information on our products do not hesitate to contact us