Trimmers

Colombardo’s range of trimmers include various models designed to meet any need of the customer.

In fact, the range includes models with cutting bars, with single connecting rod – SINGLE-BLADE – or double connecting rod – DOUBLE BLADE – with rapid-cut blade or counter blade.

Versions designed for all types of vineyards with cultivation in vertical or horizontal and to be mounted on any type of tractor (tyred or tracked) and to perform lateral, double (on the lift and the right side of the rows) and over-the-row operation (tunnels for the complete processing of both sides of the row)    

I. POTEL TRIMMERS
Potel BIL 83/86 Trimmers

The POTEL BIL TRIMMER features a “double-blade” mechanism with two mobile blades (series COLO04 tooth) on the vertical cutting bar. The Double-blade movement with double connecting rod enables the sliding of the two blades without any vibration and ensuring a neat cut of vegetation. Besides, this type of movement implies require less maintenance work both during daily work and for the preparation for garaging while not used.The trimmer is suitable also for the application on tractors with reduced hydraulic power or for semi-light tractors used on slopes with high transverse gradients

POTEL BIL ECO 010 TRIMMER

The new frame of the trimmer ECO 010 and ECO 011 are different from the other models mainly for transferring the lateral movement and the articulation for the hydraulic inclination on the lower part of the frame with three bid advantages:

*reduction of the aerial weight

* improved stability

*possibility of working on slopes with high transverse gradients (for horizontal rows)

*better visibility.

This equipment was awarded the PRIZE for TECHNICAL INNOVATION 2011 at the EXHIBITION OF MECHANIZED AGRICULTURAL MACHINERY OF SAVIGLIANO (CN)

POTEL BIL TUNNEL” GREEN TRIMMER

The trimmer of the “Potel” series belongs to equipments with “cutting blades”, featuring double alternated movement of the blades called “double-blade” reducing the vibrations to the minimum. This system performs a neat cut making the wound on the shoot of the vine less evident and allowing more rapid healing. Differently from the cutting system with “free blade” (knife) producing a wider and more irregular wound and requiring more demanding daily maintenance, with the cleaning and sharpening of the blades many times a day, the periodical checks of the rotation parts (bearings, belts) as well as higher risk exposure due to the ejection of the residual vegetation during the work.

Green Trimmer Potel Double

The trimmer of the “Potel” series belongs to the cutting type with cutting bars featuring double alternated movement of the blades called “double-blade, reducing the vibrations to the minimum.

Equipped with two cutting bars (left-right) for the lateral vegetation with preparation and possible application of the respective retractable tops (hats) for cutting the upper vegetation. Complete with blade attachment plates with shockproof safety device with mechanical release.
Five-lever distributor, one of which is in series with flow divider (only for tractors with high-capacity pump). The working width is set using two hydraulic pistons (left/right) (+/- 30°) with equal connection – distributed by a single control. The two angles are independent as are the two tops, if present, (from 0° to 90°).

II. SPEEDY-ROTOR GREEN TRIMMER

The cutting principle of the Speedy-Rotor trimmer is called “free blade” cut, because the cut of the vegetation is obtained through inertia thanks to the high rotation speed of the blades, obtaining a neat cut, which avoids enervating the shoots, even without the aid of a counter-blade. The blades are assembled overlaying to prevent the vegetation to be trimmed to escape. Every tool has a length of about 30 cm and the overlaying is about 70 cm (a wall of 1.80mt needs a module with 4 to 5 cutting blades); the structure of the tool-holding module consists entirely of a light alloy and stainless steel to make the machine extremely light.

The tool-holding modular structure of Speedy-Rotor is inserted on the same chassis of the Potel and Rotor series trimmers or, in the tunnel version, on an articulated chassis to facilitate its transport on board of a tractor (reducing the lateral volume).

In the photograph: Fast knife trimmer Mod. Speedy mounted on the front on an ECO frame with electric Joystick control.

SPEEDY available versions

Speedy-Rotor Lateral Version:

The machine is equipped with four blades (usable cutting capacity 1.50 m) on the vertical structure and a blade for the top for the horizontal cut of the row (cutting capacity 0.50 m). The machine consists of a support frame and bears four hydraulic movements: lifting, lateral run, inclination of the cutting segment by +/- 20°, inclination of the top (roof), controlled through an hydraulic distributor with four lever plus one controlling the motor with anti-shock protection complying with the CE regulations.

Speedy-Rotor Tunnel Version:

Lopping machine for the trimming of the row with special articulated frame to facilitate the entrance into the row, the transport during the displacement, and to reduce its volume; equipped with the following controls: lifting and displacement, inclination of the cutting segment and 5-lever distributor. The chassis is predisposed for future application of defoliators, shredders, and pre-pruning machines.

Speedy Rotor double version (right-left) for the bilateral trimming of the row:

The machine is equipped with a special chassis featuring the following controls: lifting, in series right-left displacement, left-right inclination of the tops (roofs), and six-lever distributor.

Besides it is possible to mount the segment with rapid cutting blades on “ECO” chassis which differentiates this equipment for transferring the lateral movement and the hydraulic inclination articulation on the lower frame of the chassis.

The trimmers we produce are available on different types of frames on request, depending on the need: heavy articulated frame, heavy fixed frame, eco frame, U-shaped frame for double trimmers, or inverted T-frame.

Videos

For any information on our products do not hesitate to contact us